Treatment technologies of fresh market wastewater

Fresh Market Wastewater (FMWW) is rich with high amounts of suspended solids, organic and inorganic compounds, nutrients, gases and some elements which come from fish entrails and seafood preparation sales, meat cutting, poultry slaughtering, fruits and vegetables sales. The excess of these parameters are harmful to the aquatic life since the FMWW is usually discharged into the drainage systems without any treatment or partial treatment. The FMWW technologies are developed due to some technical factors influencing the designation and construction. There are several projects of fresh market treatment technologies used on site area in small scale which could be replicated to other fresh market, and some case study have been tested in laboratory batch experiments. All the projects exhibited an efficiency to reduce critical parameters in FMWW and give positive impacts to the locals and responsible parties

A Preliminary Study on Gum Arabic as a Binder in Preparation of Starch Based Edible Plastic

This research emphasizes on synthesizing edible plastic using a one pot method by adding starch, gum Arabic as theb binder and sugar (sorbitol and glycerol). In order to get the right composition, the ratio of each ingredient was varied. The FTIR spectroscopy was used to characterize the structure and composition of the sample produced

Factor influencing the choice of pineapple marketing channel In samarahan, sarawak

Pineapple farming in Sarawak is mostly concentrated in Samarahan division due to the suitability of the land and the large number of people involved in this industry. The production of pineapple in Sarawak is for the domestic market only. Marketing channel decision is the most critical decision faced by farmers as it affects all other marketing decisions. Thus, the aim of this study is to examine the factors that highly influenced the farmer’s preference towards the marketing channels. The results of this study showed that smallholder farmers in Samarahan sold their pineapples to 7 channels. A multi-stage sampling approach was used to select a sample of 117 smallholder pineapple farmers in Samarahan, Sarawak. Primary data was collected using a structured questionnaire. The data was analyzed using both descriptive and inferential statistical analysis by using SPSS version 21.Keywords: Pineapple; Farmers; Marketing; Marketing channel

Task scheduling based on genetic algorithm for robotic system in 5G manufacturing industry

With the development of 5G technology, the robotic system has been bought into industrials. Even manufacturers plan the task flow by using project management. An error may occur and make the tasks overlap because they use the traditional scheduling method. It may waste much time between the tasks, and robots will get into standby mode to wait for the next tasks if the scheduling is failed. An algorithm with flexible scheduling is needed to arrange the tasks accordingly with the shortest total completion time. Genetic Algorithm (GA) is applied to task scheduling, and it provides a better solution from previous results or arrangements due to iteration. In this study, an analysis involves multi robots to complete various industrial operations, consisting of multi-tasks. To save time during processing and costs in production, GA may help it have the optimal value about total complete time to avoid any wastage. In short, the manufacturer will have higher productivity and better performance among the robots when applied a suitable Task Scheduling in the industry or workplace

Amplitude modulator of multi-walled carbon nanotubes/chitin in the c-band region

In ultrafast all-optical signal processing, the all-optical method is crucial, and all-fiber technique offers a wide range of applications in optical communications. This study investigated the amplitude modulation using multi-walled carbon nanotubes (MWCNTs) embedded into chitin as saturable absorber (SA). The MWCNTs-chitin SA is fabricate using a liquid phase exfoliation method to reduce complexity and produce an excellent material quality. In this paper, an optical amplitude modulator produced a linear region with a regression line of the peak intensity at pump power range from 17.92 mW to 67.92 mW with modulation efficiency of 0.50 dB/mW

Microalgae production in fresh market wastewater and its utilization as a protein substitute in formulated fish feed for oreochromis spp.

Rapid growing of human population has led to increasing demand of aquaculture production. Oreochromis niloticus or known as tilapia is one of the most globally cultured freshwater fish due to its great adaptation towards extreme environment. Besides, farming of tilapia not only involves small scales farming for local consumption but also larger scales for international market which contributes to a foreign currency earning. Extensive use of fishmeal as feed for fish and for other animals indirectly caused an increasing depletion of the natural resource and may consequently cause economic and environmental unstable. Microalgae biomass seems to be a promising feedstock in aquaculture industry. It can be used for many purposes such as live food for fish larvae and dried microalgae to substitute protein material in fish feed. The microalgae replacement in fish feed formulation as protein alternative seem potentially beneficial for long term aqua-business sustainability. The present chapter discussed the potential of microalgae as an alternative nutrition in fish feed formulations, specifically Tilapia

Effect of Fe substituted on the monovalent La0.85Ag0.15Mn1-xFexO3 doped manganites: their electromagnetic and microwave properties

New microwave absorber material, La0.85Ag0.15Mn1-xFexO3 (x = 0, 0.05, 0.10, 0.15 and 0.20) monovalent-based manganites with epoxy resin as a binder were prepared to investigate the effect of Iron (Fe) substitution on microwave absorption properties. The La0.85Ag0.15Mn1-xFexO3 (x = 0, 0.05, 0.10, 0.15 and 0.20) manganites were prepared using solid state method. The phase identification investigated by using X-ray diffraction (XRD) pattern, showed that all samples were single phase rhombohedral crystal structure. Fe substitution caused increase in room temperature resistivity and decrease in ferromagnetic–paramagnetic transition temperature, TC, indicating changes in carrier concentration and weakening of double exchange mechanism. Microwave reflection loss, RL measurements in the frequency range of 8 GHz to 18 GHz showed the highest reflection loss for x = 0 sample where value of reflection loss of − 57.2 dB at 16.41 GHz with a bandwidth of 2.67 GHz corresponding to reflection loss below − 10 dB was observed. However, Fe substitution produced lower reflection loss values with lowering of matching frequency with an upturn at x = 0.20. Permeability measurements showed real part of magnetic permeability increased but magnetic loss tangent decreased above 13 GHz with increasing Fe. Further analysis showed contribution of eddy current loss for most samples at high frequency region. On the other hand, permittivity measurements showed both real part of permittivity and dielectric loss tangent increased with Fe content at high frequencies indicates Fe substitution enhancing the dielectric loss component thus may dominantly contributes to the microwave absorption in the Fe substituted samples

The effect of pre-damaged level on repair damaged columns by using steel straps tensioning technique

To date, repair of damaged columns has become increasingly more significant. The failure of columns structure contributes to the serious consequences in structural stability. Most of the existing repairing techniques are based on lateral passive confining pressu re. However, this passive-type of confinement is ineffective in restoring the performance of damaged concrete columns. In this regards, active confinement was selected in this study to repair damaged concrete columns which can actively confine concrete in this study. Ste el strapping tensioning technique (SSTT) allows pre-tensioning low-cost recycled steel straps around the damaged column was chosen herein to represent active confinement. A total of 12 columns were prepared and loaded axially to certain degree of their respective ultim ate strength. Hence, a pre-damage level of the columns was developed. Then, the damaged columns repaired by using mortar and confined with SSTT. Finally, the repaired columns were then tested under monotonic uniaxial load. The structural performances of the confined repaired columns were compared with those of the repaired columns without confinement. It is expected that as the concrete compressive strength increases, the effectiveness in restoring the load carrying capacity of the damaged column becomes more significant

Draft genome sequence of the prazosin-degrading bacillus sp. Strain pr5, isolated from a river receiving hospital and urban wastewater in Malaysia

We report the complete genome sequence of Bacillus sp. strain PR5, isolated from a river receiving hospital and urban wastewater in Malaysia, which demonstrated a high capability for degrading prazosin. This genome sequence of 4,525,264 bp exhibited 41.5% GC content, 4,402 coding sequences, and 32 RNAs

Sentinel surveillance for human enterovirus 71 in Sarawak, Malaysia: lessons from the first 7 years

BACKGROUND: A major outbreak of human enterovirus 71-associated hand, foot and mouth disease in Sarawak in 1997 marked the beginning of a series of outbreaks in the Asia Pacific region. Some of these outbreaks had unusually high numbers of fatalities and this generated much fear and anxiety in the region. METHODS: We established a sentinel surveillance programme for hand, foot and mouth disease in Sarawak, Malaysia, in March 1998, and the observations of the first 7 years are described here. Virus isolation, serotyping and genotyping were performed on throat, rectal, vesicle and other swabs. RESULTS: During this period Sarawak had two outbreaks of human enterovirus 71, in 2000 and 2003. The predominant strains circulating in the outbreaks of 1997, 2000 and 2003 were all from genogroup B, but the strains isolated during each outbreak were genetically distinct from each other. Human enterovirus 71 outbreaks occurred in a cyclical pattern every three years and Coxsackievirus A16 co-circulated with human enterovirus 71. Although vesicles were most likely to yield an isolate, this sample was not generally available from most cases and obtaining throat swabs was thus found to be the most efficient way to obtain virological information. CONCLUSION: Knowledge of the epidemiology of human enterovirus 71 transmission will allow public health personnel to predict when outbreaks might occur and to plan interventions in an effective manner in order to reduce the burden of disease